Wastewater Treatment Equipment & Product Range
Your wastewater source, flow rate, site layout and discharge target decide the route before any model is selected. We manufacture packaged plants, DAF pretreatment systems, MBR/MBBR biological units, PP tanks, pump stations and advanced treatment modules to match that route.
Start With The Water
Clear Product Families
Factory-Led RFQ Review
>
>
>
Equipment Lines For Industrial And Decentralized Wastewater
The right product line depends on the wastewater source, pollutant profile, capacity range, site constraints and discharge target. Start from the route, then narrow the scope to the equipment family that can carry the process.
Packaged Wastewater Treatment Plants
For decentralized sewage, domestic wastewater and small-to-medium organic wastewater where a compact factory-built plant is preferred over a civil-heavy layout. MBR, MBBR, BFTR, QD Tank, MV-type, buried and cold-region configurations are reviewed by capacity, site and target.
DAF And Pretreatment Systems
For oils, suspended solids, colloids, light flocs and hard-settling matter before biological or advanced treatment. DAF, dosing, filtration and sedimentation should be selected as part of the pretreatment route.
MBR And MBBR Biological Systems
For organic wastewater where biological treatment, nitrification, denitrification or compact effluent polishing is needed. MBR uses membrane separation, while MBBR uses suspended carriers; the better route depends on water quality and footprint.
QDPP And PP Integrated Tanks
For corrosion-sensitive, compact, buried or layout-constrained sites. Horizontal, vertical and hollow PP tank options should be matched to discharge target, burial condition, inlet/outlet position and structural requirements.
Advanced Treatment And ZLD Modules
For high COD, color, heavy metals, acidic wastewater, high-salinity streams or reuse and ZLD review. These modules are not default add-ons; they require water report review and route confirmation.
Anaerobic Reactors And Process Support Equipment
IC anaerobic reactors can form the core anaerobic stage for medium- and high-concentration organic wastewater. Pump stations, dosing systems, filters and sedimentation tanks support collection, conditioning, polishing and solids separation around the main route.
Start From Water Conditions, Not A Fixed Model
If the wastewater source, pollutants and discharge target are still being reviewed, start with the full treatment route. If the route is already defined, compare capacity, material, layout and delivery scope against the matching equipment line.
Complete Treatment Systems
DAF Pretreatment
Packaged Plants
Industrial Wastewater Solutions
Match The Treatment Route To Water Conditions
Product selection starts with the water, not with a fixed model. The same family can be configured differently when the source, pollutant profile, salinity, site layout or discharge target changes.
Decentralized Sewage
Consider packaged MBR, MBBR, QD Tank, MV-type, QDPP or buried integrated systems based on flow, land use, installation form and discharge target.
Oils, SS And Light Flocs
DAF, dosing, filtration and sedimentation modules can support food, slaughtering, textile, papermaking and similar pretreatment routes.
Organic Wastewater
MBR, MBBR, BFTR and IC reactor combinations can be reviewed for COD, BOD, ammonia nitrogen and biodegradability conditions.
Difficult Or High-Salinity Water
FCM, catalytic oxidation, acidic wastewater treatment and ZLD routes are reviewed separately from standard biological or pretreatment products.
Selection Matrix For Early RFQ Scoping
Early RFQ scoping works best when the water report, capacity range, material requirement, civil condition, electrical requirement and discharge target are reviewed together.
Integrated Plants
Packaged carbon steel and modular treatment plants.
DAF And Pretreatment
Front-end separation and conditioning.
PP And QDPP Tanks
Corrosion-resistant integrated structures.
Advanced Treatment
Modules for difficult wastewater review.
From Water Data To Product Scope
We review the process route against water data, site limits and discharge targets before quoting a product list. That keeps the discussion tied to actual wastewater conditions instead of a generic catalog match.
Share Water And Site Inputs
Send wastewater source, daily or hourly flow, available indicators, site layout and discharge or reuse target.
Review Process Route
Confirm whether pretreatment, biological treatment, advanced oxidation, membrane concentration or evaporation routes are relevant.
Configure Product Family
Select product family, material, module count, installation form, optional configuration and document requirements.
Prepare Technical RFQ
Align the product scope, boundaries, delivery notes and quotation inputs before detailed procurement review.
Manufacturing And Procurement Support
Our support connects product selection with engineering review, custom configuration, export planning and procurement documentation for industrial and decentralized wastewater projects.
Custom Product Configuration
Flow rate, material, footprint, burial condition, insulation, dosing, lifting and downstream treatment modules can be configured by project requirement.
Factory-Built Product Range
Product families include integrated plants, PP tanks, flotation systems, dosing, filtration, sedimentation, anaerobic reactors and advanced treatment modules.
Documents For Procurement Review
Applicable certificates, patents, drawings, technical descriptions and quality documents can be matched to the requested product scope.
Modular And Export-Oriented Delivery
Packaged, skid-mounted and modular configurations can be reviewed for container loading, overseas delivery, site installation conditions and commissioning support requirements.
20+ Years
40,000 m2
Send Water Data For Product Selection
Send one set of project inputs, and our team can route it to product selection, solution review or complete system RFQ without asking you to restart the inquiry.
Motiva RFQ / Water Data Form
1
2
3
One submission gives the technical team enough context to start the first review without making your team repeat the same project basics.
Product Selection FAQ
These questions help buyers move from product browsing to a practical RFQ without assuming one standard configuration fits every wastewater source.
Our product families include packaged treatment plants, MBR and MBBR systems, DAF systems, QDPP and PP tanks, dosing, filtration, sedimentation, pump stations, anaerobic reactors and advanced treatment modules.
DAF is usually reviewed for oils, suspended solids and light flocs. MBR and MBBR are biological treatment routes for organic wastewater, and selection depends on influent data, footprint and effluent target.
Yes. Systems can be configured by flow rate, material, installation form, module count, dosing needs, climate conditions, lifting requirements and project documentation needs.
Useful inputs include wastewater source, flow rate, COD, BOD, SS, ammonia nitrogen, pH, TDS, salinity, oil, color, heavy metals, site layout and discharge or reuse target.
No. Industrial wastewater, domestic sewage, acidic wastewater, leachate and high-salinity streams require different route reviews and equipment combinations.
The first review depends on data completeness and wastewater complexity. A source, flow rate, target standard and available water-quality indicators are enough to start; detailed scoping is confirmed after the route, material, layout and delivery requirements are reviewed.